Sharp GF-800 Portable Stereo Component system from 1983
SPECIFICATIONS (SHARP 800H)
Power source: AC 110V – 127V and 220 -240V, 50/60Hz
DC 1 5V (UM/SUM-1 or R20 type х 10,
or external 15V DC)
Output power: MPO:30W (15W + 15W) (AC operation)
(DIN 45 324) RMS: 26W (13W +13W) (DC operation, 10% distortion)
Dimensions: Width; 680 mm (26-13/16″)
Height;225mm (8-7/8″)
Depth; 180mm (8-1/4″)
Weight: 8.8kg(19.4lbs.) without batteries
TAPE RECORDER
Tape: Compact cassette tape
Frequency response: 30Hz- 14,000Hz (normal tape)
30Hz -16,000Hz (CrO2 tape)
30Hz – 17,000Hz (metal tape)
Signal/noise ratio: 55 dB (Deck 1, playback)
60 dB (Deck 2, recording with Dolby NR)
Input impedance: External mic; 600 ohms
Phono/line in; 50 kohms/50 kohms
Loaded impedance: Headphones; 8 ohms 32 ohms
External speakers; 8 ohme- 16 ohms
Line out; 0.6V/50 kohms
RADIO
Frequency range: LW:150 kHz – 285 kHz
MW: 526.5kHz – 1606.5kHz
SW: 5.95 MHz-18 MHz
FM; 87.6MHz – 108 MHz
SPEAKER
Speakers: 16cm (6-1/2″) free-edge woofer х 2 ,
5 cm tweeter х 2
Impedance: 8 ohms
Input: 26W (maximum)
